OSD adjustment is incorrect. The cord set is HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors. There are three items: The bottom line of the main menu shows information for the selected function. Do not put on unstable position. This device must be operated with the original power supply, part number:

Uploader: Kazrazilkree
Date Added: 3 February 2012
File Size: 46.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 70456
Price: Free* [*Free Regsitration Required]

MQ219 Touch Signage Monitor

It is called a 15 Pin Mini D-sub Connector. The socket-outlet should be installed near the equipment and should be easily accessible. Some examples are listed below: The buttons on the monitor are now locked.

Monitor Controls Hot-keys Auto Config: Do not install this monitor near a motor or transformer where strong magnetism is generated. Do not put on unstable position.

Check that Video Cable from the displays has been mulltiq and correctly connected to the pin Video Connector at the rear side of the computer or AV device. Pressing it again will turn it off.

Changes or modifications not expressly approved by the manufacturer could void the user authority to operate the equipment. Adjustment HUE to make color more green or purples. Video Input Pin Assignment To reduce the risk of electric shock, do not remove cover or back.


MultiQ Power supply MQ, PSU – EET Europarts IE

From indicated inactivity to Power Saving Position A2 the total time must not be set to more than 70 minutes. Only support to DVI-D function monitor 5. Do not spray with liquid or aerosol cleaners. Always use the appropriate AC cord that is certified for the individual country.

MultiQ , User Guide |

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure: It also exits from the submenu back to the previous menu. There are three options for the automatic timeout: The cord set is HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.

If still not clear, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, line-free cloth, and wipe then screen. Windows drivers for both the monitor and the graphics card are supplied on the Windows CD or diskettes. However, there is no guarantee that interference will not occur in a particular installation.


A slider with current value is displayed. Dangerous voltage Disposal The lamp in this product contains mercury. This procedure only has to be done once and the monitor will remember its optimal settings in the future. Please consult section 7 for OSD screen adjustment procedures.

Only support to DVI-D, function monitor. Images on the monitor will become distorted and the colour irregular.

The graphics card must also be set up correctly in Windows and make sure the video output of the graphics card is listed in Section 6. Refer all servicing to qualified service personnel. To prevent electric shock and fire hazard, Replaced or installed only with the same power adapter. Time settings are adjusted from the system unit by software. This type of cancellation will not save the previous changes.

The power adapter use on the LCD monitor products has been evaluated and tested to comply with special use of medical equipment and certified under EN and EN standards.